Finished Sign

After much painting and fun- here is the final sign!

The sides are spray painted silver, the front 

was painted in acrylic and finally I sprayed a lacquer

over everything. I am really pleased with the outcome!

Signage, Continued

The next step was to apply 6 coats of gesso, sanding in
between every 2 layers to create a smooth and even base.
All of these steps took quite a lot of time and effort with
very little to show for all my work, but it was important,
because it created a good, solid foundation for my next step
which is painting my design. Now the fun really begins!

Signage Project

Cradle- the frame for the panel to prevent warping

Panel- Sanded and ready for priming

The first steps to creating my sign after designing the

concept was to cut out the cradle and masonite panel. Next,

I put the cradle together with wood glue and screws and then

glued the panel on top and secured using my nail gun.

Finally, I sanded the entire piece so it would be smooth and

used the sander to roughen up the smooth masonite panel

so the gesso primer would adhere well to the panel.

Concept Drawing of Sign Idea

 Concept Drawing of Sign on Location

 Original Sign